Bambulab P1P/P1S Klipper Screen

12864 LCD housing and adapter for the Bambulab P1P/P1S!
This allows you to put a readymade 12864 by companies such as bigtreetech on your klipper bambulab machines!
For cable routing you will have to run the cables first, then crimp on connectors when done routing to remain non destructive to the original printer.

You may have to trim down the stem on the push button (under the pause symbol) to fit, the top of the switch should be 6.2mm tall measured from the PCB

Requires:
M3X10 (4x) ISO-7380 button head
M3X6 (2x) ISO-7380 button head