January 26, 2025
Description
A cap for this standard spindle design.
Print as oriented in the stl, delete whichever style you do not want; the hole is sized for a 20x12mm rocker switch.
Fit the lower half, I use a tight cable-tie to get a good fit. There are no mounting holes on the top of this spindle so you will need to use a cable tie like me, or glue.. ;-)
The top cap includes a cut-out for a recessed cable-tie to hold the wiring loom, use small self-tapping screws to join the two parts together.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
Easy Target
