Chinese New Year Lantern

Printed on Bambu Lab X1C without supports, a little bit of post processing required with exacto knife.

Parts Needed to complete the project.

1.  Five M3 hex bolts
2. Five M3 square nuts.  https://www.amazon.com/dp/B082WHHYHJ?ref=ppx_yo2ov_dt_b_fed_asin_title
3. One 5v buck converters:  https://www.amazon.com/gp/product/B0D4QD849J/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1
4.  One Female DC Threaded Barrel Jack Panel Adapter 5.5mm x 2.1mm https://www.amazon.com/dp/B091PS6XQ4?ref=ppx_yo2ov_dt_b_fed_asin_title

      5. One, Male DC 2.1mm x 5.5mm Wire Power Pigtails Adapter  https://www.amazon.com/dp/B0B4C2VSHV?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

      6. One, Round Toggle LED Switch 12V Car Truck Rocker On-Off   https://www.amazon.com/dp/B07T1JG6BD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

    7.  One, LED Flame Light Bulb.  https://www.amazon.com/dp/B079211C4X?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1   You will have to pri open the bottom half of the light bulb with flat head screwdriver, remove circuit board for AC and solder the LED wires to the output of the 5v buck converter.

 and last, you will need a power brick of any voltage which is supported by the input of buck converter.  9v to 24v should work if you have those laying around the house.

Fun project to source and build, your significant other will see that you did not waste your money on 3D printing, but can actually make useful things around the house.

Switch is wired thus:  Middle pole goes to load (power source) which is positive input of your 5V buck inverter, other silver terminal goes to power source, which is your barrel plug, and silver terminal goes to ground, for light on the switch to work, when switch is in on position.   Any questions, ask away.  Enjoy printing and building.   Happy Chinese New Year.