Sculpey/Modeling Clay Tool set

The parts that print vertically are narrow and should be printed with a brim. The file name reminds you to do so. The rest of the parts do not need a brim. 

The poking tool has a small support under the sharp end that can be snapped off after printing. The small bits for pressing indents into clay can be slid in and out of the pen shaped tool with the hole in the end. 

The “core” for the roller is honestly optional if you print the tall version of the roller. It would add some extra stability. If you print the horizontal version, it is required to snap the halves together. 

PLA and PETG both seem to work fine for these prints.