January 26, 2025
Description
I made this Hueforge to celebrate my Buckeye huge win in the CFP. I tried my hand at doing a Hueforge mod with the trophy rising from the picture. My pint came out fantastic and I hope yours does as well.
Project: 2025 champs.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x195.65mm in size
You may print at higher layer heights below the Min Depth of 2mm
The Max Depth is 5mm and the Actual Depth is 3.1mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite Red Transmission Distance: 1
PLA polyLite White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #28 (2.32mm) swap to Blue Gray
At layer #29 (2.4mm) swap to Grey
At layer #33 (2.72mm) swap to Red
At layer #34 (2.8mm) swap to White for the rest.
License:
Creative Commons — Attribution
Alfedo Fred
