Fanatec CSL Pedal Clutch Mod

When printing the base increase the wall count until there are no holes/infill between the bearing hole and edge. I used 35% gyroid infill.

When printing the arms use the orientation like in the 4th image and set wall count very high (effectively 100% infill).

You can use the replacement shock cap if you want a stiffer spring (pedal travel stays the same).

Parts required:

• 1x 140mm RC Shock Absorber
• 2x 608 ball bearings
• 2x M6 x 60mm bolts
• 1x M6 x 40mm bolt
• 5x M6 nuts
• 2x Large washer
• 6x Small washer

AliExpress links:

• 140mm RC Shock Absorber (1/8 scale rear shocks, don't order the front shocks by mistake, they are 120mm): 
  • https://www.aliexpress.com/item/32751654080.html
  • https://www.aliexpress.com/w/wholesale-140mm-rc-shock.html
• Stiffer spring upgrade (Length: 90mm (2Pcs), Wire diameter: 2mm,  Outer diameter: 24mm):
  • https://www.aliexpress.com/item/4000436939383.html

You can find CAD files in the downloads