toilet sponge tray

This sponge tray mounts on a 50mm diameter pipe e.g. behind the toilet. It is meant for a 90x70 mm sponge.

If you need other sponge size or other pipe diameter let me know and I will see what I can do.

Instructions

• you need:
  •  2x M3 square nuts
  •  2x M3x25 screws
  • a strip of duct tape
• Print the model as you like
• use a 3mm drill to clear the holes
• test fit the square nuts and the screws
• put duct tape onto inerside of the clamps - this is to avoid scratchmarks on the pipe and for a better grip
• put it in place and screw it onto the pipe
  • if your square nuts are a bit loose, use some tape to hold them in place while installing the tray

Additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.