iPhone 13/14/15 + Case - Vertical and Horizontal Orientation - Standby Mode Dock Alarm Clock

Since I don't have AirPods, I found the docking station too long, so I shortened it. The most important change is that the docking station can now also be used vertically. Additionally, there are variants with recesses for silicone feet to prevent slipping, which I find especially useful in the vertical position. 

The docking station is large enough to fit an iPhone 13 and 14 with a case (152x75mm). A MagSafe charger or similar models with a diameter of ⌀ 56mm must be glued in. I’m using the cheaper one from AliExpress, which works well without any issues

This 3D model is not for commercial use.

Print Settings: 

• Top shell layers: 3
• Bottom shell layers: 2
• Infill density: 8%
• Infill pattern: Gyroid
• Infill/Wall overlap: 10%
• Support type: tree(auto)
   

Materials list:

Silicone feet - https://de.aliexpress.com/item/1005006127798045.html?spm=a2g0o.order_list.order_list_main.21.186d5c5f2TAUWA&gatewayAdapt=glo2deu

Charger -    https://de.aliexpress.com/item/1005006745388828.html?spm=a2g0o.order_list.order_list_main.4.23fc5c5fjitnfW&gatewayAdapt=glo2deu