Headphones desk holder

Please note that there are 2 parts you should use a hard filament (e.g. PLA) and 2 pads that I recommend to print with a flex filament (e.g. TPU/Elastan). Softer is better.
Square flex pad should be glued to a main body. However, if you don't have glue, it will also work just fine. 

Printing settings:

1. walls: 5 or more. It must be rigid and strong;
2. infill 40% or more;
3. supports. I did it w/o supports but that depend on printer and settings;
4. rafts - no. Depends on your heatbed adhesion. 

Filament used by me: 

• PLA for a main body and a screw as PETG is more flexible and holds less load.
• Elastan D100 for pads.

Support creator here: 

PayPal me :)

Patreon