Photo Frame (4 x 6 in)

I wasn't planning on making this but I needed some reasonably quick and simple Christmas gifts for family.

This is a simple but bold, modern photo frame that fits a 4 x 6 in / 10 x 15 cm photo. The back plate is attached using 8x 8 x 3 mm magnets which you insert into the model while it's printing. The frame can be used in either landscape or portrait orientation on a desk , or hung on a wall using a screw.

I used Polymaker's Polyterra Graphite and Marble White filament for the frames in the photo.

Please note that I used cheap magnets that may not be exactly 8 x 3 mm so if you have problems with the magnets fitting then that could be why. Let me know and I should be able to help. Also make sure the magnets are oriented correctly or the plate won't stay on properly.