January 14, 2022
Description
I adjusted the size of the frame to accommodate the Q-Pack MK3 pack. The previous design was a little to wide and tall. I have left the other files in for folk that want the old files. The new files have QPackMk3 in the file name
I made a small change to the Chip Frame and now it will work with both the 2021 board and the previous model.
This creates a frame for the Power Cell lens that can be attached to the pack with adhesive (or other means) and allow for the easy addition or removal of the GB Fans Power Pack Lights Power Cell v4.1 (2021 version). Due to the additional headers for the N-Filter and the 4 Cyclotron chips, extra space had to be cleared on the LED-side of the board to that it would mate properly.
The lens I designed this for is 19mm x 114mm x 2mm. STEP files have been included so that you can modify the lens frame if necessary.
This is designed to use 6mm M3 screws.
License:
Creative Commons — Attribution
Shwalamazula
