LxW Basic - A 3DPrinted ITX Case for Budget Builds

This 3D-printed Mini ITX case is designed with budget hardware in mind, allowing you to build a compact PC without the high cost associated with smaller components. The mainframe prints as a single plate, simplifying the assembly process with minimal additional parts required. This design is not only practical but also reduces print time and resource use. 🛠

Detailed Specifications:
Motherboard Support: ITX form factor, allowing for a compact and efficient build.

Power Supply: Compatible with standard ATX power supplies, helping you avoid the higher costs of smaller PSUs.

CPU Cooler Clearance: Supports coolers up to 112mm in height, which accommodates many budget-friendly air coolers.

GPU Compatibility: Fits GPUs up to 200mm in length and 2 slots thick, offering decent performance in a compact setup.
 

Storage: A bay for 3x 2.5" drives with a maximum thickness of 9mm each, perfect for SSDs.

Cooling Options:
- Right Side: Supports either 2x 92mm fans or a single 120mm fan, but not both simultaneously.
- Top Panel: Fits 2x 92mm fans with a 15mm thickness limit to maintain a low-profile design.
- Left Side: Equipped for 2x 60mm fans to aid in airflow and heat dissipation. 🌬

Front Panel:
The front panel is integrated with the mainframe and includes:

Custom Power and Reset buttons.
2 activity LEDs to monitor system status.
A dual USB 3.0 header for convenient access to peripherals.
 

Assembly Guide Available HERE

Assembly Notes:
While the case is designed for straightforward assembly, there are a few critical steps where extra attention is needed:

Fan and Cooler Installation: Ensure fans are correctly oriented for optimal airflow. For the top panel, use low-profile fans to avoid interference with other components.
 

Drive Bay Installation: Secure the 2.5" drives firmly to prevent vibration, in case of hard drives, using screws of appropriate length to avoid damage.
 

Front Panel Assembly: Some components are assembled within the case, which can be tricky as you'll need to maneuver a screwdriver or soldering iron inside the compact space. Precise alignment is key, so take your time to ensure everything fits snugly and securely.
 

This case is printed from PETG by Bambulab, with a black mainframe and green accents, offering both durability and style. 🖤💚

Your feedback is crucial for further refinement. By sharing your assembly experience and any challenges faced, you help improve future iterations and support the maker community in achieving better results. Let’s create something exceptional together! 💬

For more content like this, infos on the current state and development of the projects, follow me on Instagram