Ford F350/250 Back Up Camera Mount for HydraBed Flat Bed

This allows you to be able to now use your back up camera with a HydraBed bale bed installed. The bottom nut is wide enough for drilling holes for the 3 M3 screws to thread into. The second lock nut has slots cut out for the camera to slide passed and for the bolts to go into. Then the cap securely mounts the camer in place. Once lined up, I was able to drill my holes to secure the lid down with screws. 

Printed in eSun PETG for resilience to hot and cold environments. Printed at 100% infill. Not sure if I needed to go that much. Threads are kind of a tight fit initially, but running the nuts on and off loosens them up. 

This was for a 2024 F350 superduty, but I know the cameras are mostly the same for a bunch of different types of Fords, both the cars and trucks. 

Everything has been tested and is holding up to a harsh winter so far of -15*F. It is staying securely in place and has not moved.

Please upload your makes and any changes you make. I would love to see them!