Pew-Bath Setup

The silicone cleaning mats are nice, but the spring and bore often present other challenges while cleaning. The spring bath can magnetically detach from the bore bath and ahdere to the cleaning mat. It gives the cleaner a way to soak the components and contain the cleaning fluid.

I printed in ABS for good chemical resistance, PETG or ASA should also be ok.

The magnets used are 60x10x3, which are common on amazon.

The bore bath is elevated off the bottom for draining/centering, along with the cap, which should fit the 9mm bores. I measured out 3 different models from different manufacturers, so it should work. The spring bath fits a full sized frame spring (9mm modelled, but have not tried others).