October 25, 2025
Description
This barrel has been designed as a guidance and/or obstacle on your crawler course and parcour.
It can easily be stuck into the ground. I recommend to print in PETG with at least 3 wall lines or more.
The modell is made with a spike for better hold in the ground. You can easily cut it off in your slicer to use the barrel only.
Have fun improving your driving skills!
Material: PETG
Layerheight: 0.3mm or better
Infill: 25%
Wall lines: 3+
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
First Layer Design
