Soda Stream Crystal 2.0 Wall Mount

This holder stores three SodaStream Crystal 2.0 bottles along with their lids. It features a rail system that securely mounts to the wall, allowing the three hangers to slide on effortlessly.

Two Versions Available:

• With Stopper: Extended rail with an optional stopper for extra security.
• Without Stopper: Shorter rail where the top hanger sits flush with the rail.

The clamping force of the rail can be adjusted by tightening the screws. The stopper is not strictly necessary—just be careful not to overtighten, as this may prevent the hangers from sliding smoothly.

Mounting Details:

• Two-part rail, secured with three screws and wall plugs.
• Compatible screws: Countersunk screws (3.5 – 5 mm).
• My setup: 3.5×35 mm screws + 5 mm wall plugs.

Print Details & Included Files:

Both versions are provided as 3MF project files for easy printing.

• Material: PETG
• Layer height: 0.2 mm
• Nozzle: 0.4 mm
• Perimeters: 5
• Infill: 30% (rails printed at 100%)
• Infill modifier: Reinforced high-stress areas
• No supports needed
• Printer: All parts fit on a Prusa MK4S or similar i3 build plates (Structural 0.2 mm preset in PrusaSlicer).

I’d love to see your prints and hear your feedback! 😊