January 30, 2025
Description
This is a protector - stand for Aquaphor Glass filter Jug.
The jug is very handy and im my opinion much more pleasent to use than plastic ones from Aquaphor but it has no protection on the bottom. I found it very disturbing and stressful when putting it off quickly not to brake the glass so i made this protector.
Material i used is Sunlu PLA+ black.
Standard bambu studio settings for printing speed - didn't changed nothing from default.
Prints about 1 h.
It is easy to instal, fits well and also isn't to hard to take off in case you want to clean your jug or put it in the dishwasher.
You may also try to print it in TPU. It might be even more pleasent to use than PLA :)
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Bart_Pe
