E3D PZ probe PCB mount Stealthburner

E3D PZ probe PCB mount for the Voron Stealthburner.

Pros:

• You can see the LED lights and the connections better since the board is inclined.
• Occupy less space. 
• Easier to attach and detach the board.

I used mine with the GALILEO 2 and BTT SB2240; however, you can use it with any other with the same hole spacing as the original carriage upper part. 

I used it with this CNC aluminum carriage link, other_link, but from what I could see, you can make a cut on the printed carriage, and it should work fine. I already did that and attached the files. 

Here's how can be used with the modified ( cut ) printed version:

Aluminum CNC carriage mount: 

!!! Attention : 

• You will have to use a 10mm longer screw on the upper part of the carriage. The original were two M3x30 and I used a M3x40. I also used 2 x M3 nylon locking nuts but you could use normal ones (preferably with some Loctite or other threadlocker).

*CAD and STL files are available.