November 12, 2025
Description
Made for Sovol SV08 TOP HAT Side Exhaust by Nadir@CN3D
Better version with smaller footprint that doesn't require any drilling
Simple support for PTFE tube so it doesn't dangle around or get into the corner
Printing:
If you print abs/ASA then print it from abs or ASA, otherwise PETG will do
4 walls, 5 bottom and top layers, 0.2 height, 20% infill
It doesn't need supports but can benefit from some.
You will need 2 x 4x15mm screws
License:
Creative Commons — Attribution
7
Dantak
