January 11, 2022
Description
This jig is to help align the track to leave the exact amount of spacing for the kerf of the blade. This is used if the waste board is to the left of the track and what you need is on the right.
Festool saws have different widths so use the offset for the model below. This should be able to work on other track saws other then Festool if the blade kerf is the same.
TS75 - 2.4mm
TS55 - 2.2mm
TSC55 - K 1.8 mm
Update: 02/02/22 - added reinforcements to the top and bottom marking area.
Category: Tools
License:
Creative Commons — Attribution — Noncommercial — Share Alike
8
3DDIY
