January 11, 2022
Description
These are legs I created to use with a piece of wood to create a stand for your monitor. You will need 3/4 wood at 8 inches deep to friction fit into the slot. The length is up to you I suggest if you use it longer use more legs to counter any bowing. You just need to slide the piece further into the middle where you need support. The design inside is based on your infill pattern. I used a honeycomb with no top and bottom layers. You want your thickness of walls set to 9.
Pictured is honeycomb at 6% infill and no rotation on the pattern. You can have fun with trying gyroid triangles etc.
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
.2
Infill:
6
License:
Creative Commons — Attribution — Noncommercial — Share Alike
3DDIY
