Hydro flask 32oz widemouth boot

This protection boot fits on a 32oz hydro flask widemouth bottle.

Print instructions:

• vase mode (this is important)
• 0.7 wall thickness (this is important)
• 0.2 layer height
• 20 solid bottom layers (see in slicer preview to judge how much bottom layer you like)
• I used PETg (Prusament Galaxy Black), because this material is a bit flexible and a bit more heat resitent then regular PLA

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.