Moulinette Replacement Pin

The pin is for the Moulinette from the 70s (type number 32002).

Print instructions

• Supports for the two rings (see picture)
• 0.15mm layer height
• 3 perimeters
• 70% adaptive cubic infill

I printed the pin in Prusament PC Blend, but PETG should also work.

I added two variants, so that the pin fits perfectly on the motor, depending on the printer:

• moulinette-pin-5.9.3mf →0.1 mm smaller hole
• moulinette-pin-6.1.3mf →0.1 mm larger hole