Superlighter - Logitech G305 Mod (~38g)

FINALLY FINISHED

I've tested the final version of this mouse for a couple months now and I'm convinced it is pretty much as good as it will get. Enjoy! 

Background Story

This Model was initially made for school and then continued in my off-time. However after the tens or even hundreds of hours spent designing, testing and iterating I've finally finished it, so I thought I'd let others have access to it and maybe someone can build their own cheaper and lighter G Pro X Superlight.
 

Parts

3D-Print                                                               ~10€

Mainboard: Logitech G305 (obviously)           ~35-40€

Battery: 100 mah LiPo                                       ~2€

Charging Controller: TP4046 Board               ~2€

USB-C Breakout Board (optional)                   ~2€

Mouse Skates                                                     ~8€

…and like 10cm of cable to solder them together

=60-70€

Instructions

This mouse was designed to be printed on a professional SLA-printer. FDM-printers are probably too inaccurate, as the model has very fine bridges and you'd need supports for basically the whole thing.

If you have any questions leave a comment and I'll do my best to respond, I know this description is pretty short so just ask away. I can also upload the project- or STEP-files.

Have Fun!

Credit

https://www.thingiverse.com/thing:3650672