February 27, 2025
Description
The Mic Mini fits into the case with the wind muff mounted. The case is still pocketable.
For the hinge use a piece of 1.75mm filament or a metal rod.
The model with the 2mm hole is an easier fit.
Optional: In the bottom part there is place for two 5x2mm magnets, which will hold the mic perfectly in place. Use the mic itself to find the proper polarity orientation. I highly recommend this as it makes it so much better to handle.
Use any material.
No supports required if printed on the bottom/top flat surface.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
fermit
