License Plate Frame (US) - Print in Two Halves

The license plate frame on my car was wimpy, so I replaced it with this frame which is not. The model is half a frame, allowing it to be printed on many printers. Print two of the model and glue together (you may want to bolt to a license plate when gluing to ensure the holes line up).  I used PET-G which has warped a little after a year, but it is still solid (I believe I did 2 walls, 25% gyroid infill). Feel free to use something else if you like. 

Edit - After several years I reprinted in ABS as the PET-G was pretty warped from the sun.