Sunlu spool turntable/rotating stand

Spool has a twist on lock, so I made a part that locks to a spool as well. Other part has bearings. Assemble it upside down and turn around so the bearings won't fall out.

Printed with PLA.
0.22 layer height.
3 walls.
15% infill.
No supports.
Top/Bottom pattern concentric for the plate, Rectiliniar for the spool lock part.

Very snug fit for the spool lock part, so don't worry if it will seem that it doesn't fit at first. It does :)

I had an idea to make a hole in the middle for the bearing on the bottom of spool part that could attach to the plate with a screw, but was to lazy to do it. Maybe I will update it some day.
Plate might be slightly transparent if you'll print it in white.