BTT HBB Keys

These are my own set of keys which I modeled for my Voron Trident's Bigtreetech HBB macro keypad

My personal use for each one is as follows:

• home all axes
• maintenance mode (printer lowers bed to the bottom and brings toolhead to the front, usually done for nozzle swaps
• home xy axes
• turn on/off chamber lights
• pause/resume print
• disable motors
• switch from single color mode to mmu using ercf. This is very specific to my printer but it could be used to disable ercf or similar

Printing

print in the material of your choice, each key is composed of three parts: black shell, front design, and switch attachment. Print them as a single piece making sure to use a transparent filament if you want light to shine through them.

Split each key using the split to parts button on your slicer

I found the buttons to be a bit difficult to insert in the btt hbb switches, I used a standalone switch I had laying around for pushing the key in and better create the space needed. My designs started from the btt supplied template so it may not be an issue for you

Skirt case

wondering where the skirt adapter shown in the picture comes from? It's my own design you can find here