Star Wars Neon Line Art - Sandcrawler

Jawas know a good deal when they see one—and this Sandcrawler is rolling in, glowing like a desert mirage.

This latest neon-inspired design captures the rugged, industrial charm of the Jawas' mobile fortress, the massive Sandcrawler. A home, a workshop, and a traveling junkyard all in one, these lumbering behemoths are filled with scavenged droids, spare parts, and mystery deals you’ll regret later.

By day, the crisp, mechanical lines make for a clean display. But in the dark, it glows—just like the eerie eyes of the Jawas inside.

Would you trust a Jawa with your tech? Drop a Utinni! in the comments if you love this design! ⚡🔥

🎨 These are the filaments I've used

• Bambu Lab Basic PLA Black
• Bambu Lab Basic PLA Glow

Print and assembly instructions

Geometric Art

• 0.20 layer height
• Wall Generator: Arachne
• Top surface pattern: Monotonic
• Infill: 15%
• Color change at layer 21 (4.20mm)

Frame

• Wall Generator: Arachne (otherwise the chances of the print-in-place latches fusing to the frame are higher)
• Infill: 15%
• To loosen the latches move them up a bit before turning them
• Use the latches to secure the artwork into the frame (TIP: add a strip of tape to the back of the artwork where the latch will hold if the latch is too loose)
• When you use the wall hook, make sure you turn the latch under the hook to the locked position before installing the wall hook. Slide the artwork under the locked latch first, position it into the frame and close all other latches

ALL The Crafty Maker designs are protected by Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or reproductions from those files. If you want a commercial license to LEGALLY SELL 3D prints, you'll need a The Crafty Seller subscription.