Bambu Lab A1 Series Dual USB Port

The Bambu Lab A1 Series Dual USB Port is for the Bambu Labs A1 / A1 Mini printers.  It utilizes the 24v provided by the Bambu Labs Printer port.  Uses a cable with a male 4-pin Molex connector on one end.  On/Off switch.

Items Needed:

• 1x Dual USB Fast Charger Buck Module Input 24V 
• 2x M2.6x6mm screws, self-tapping
• 2x M2x6mm screws
• 1x  Switch 10x15mm SPST 2Pin

Assembled units and kits for sale at 3DMachinist Etsy Store

• Kits (PCB Board, USB Board, screws)
• 4-Pin Molex Cable

Installation

Install the Bambu Lab A1 Series Dual USB Port on and to the back of the right column. The case allows for the position of the USB ports to face up or towards the back of the printer.   Connect the power cable to the open 4-pin bus cable connection on the printer base.

Specification

• Materials: Plastic, metal, printed circuit board

Recommendations

• Filament: PETG
• Infill: 25%
• Support: Yes