Mini heart decoration

Miniature heart decorative piece or lamp cover. This time I only provide the cover :)

The heart once modeled is hollowed and then sliced so that there are no perimeters (top, bottom and minimum perimeters are set to 0). Also, I had to make a little stand on the bottom so that it can be printed and added modifier so that the base have perimeters.

Print settings:

• 0.2 mm layer height with custom settings
  • Layers and perimeters
    • 0 perimeters
    • 0 top and bottom layers
    • Fill gaps: OFF
  • 5 mm thick brim
• Filament: PLA 
• 12% Gyroid infill
• 0.4 mm nozzle
• NO SUPPORTS NEEDED

You can play with different infills but in my opinion the gyroid looks the best. If you are unsure how to do this you can use my g-code. Scale it to your desire. I have chosen this size because of the stand.

As for the stand with LEDs, I have used an old decorative lamp similar to this. I have removed the cage and the bulb unscrews and you have a nice base with LEDs which are connected with steel wire so that you can bend it and shape it. Very nice for tinkering and trying out designs for lamps :)

Any suggestions are appreciated.