Coffee cup holder - Rotatable

I couldn't find anything similar on the market, so I designed one. It is a tree-style nine-coffee cup holder with a rotatable base, best suited for Loveramics 300ml coffee cups; 200ml is okay, but it's just a bit tight to take out. I printed using PETG and PLA Matte, and both are working fine.

The design has two variations: one with a saucer holder and the other without. Depending on your needs, you can print either one, but please note that saucers can add weight to the base bearing and make it rotate less smoothly. Only print either one of the last two plates!

* The build plate on the A1 mini is too small to print the top level, so this design is not yet available.

Variation 1 with saucer holder (With a saucer support plate and a third-level branches to fit the saucer in place):

Variation 2 without saucer holder (No third-level branches):

Assembling is easy. Just push all the pins inside the carrier (smaller circle toward the inside, larger circle towards the outside), then follow the image in the assembly guide to assemble the rest. Level 2 tree branches are a tight fit; you can hammer them in if they are too tight. In variation 2, replace the third level of branches with the ring.

There's only one way to fit the branches correctly; please refer to this image:

For the lazy Susan bottom part, please use a texture build plate to print so it can add more friction to the table.

Credit: The base Lazy Susan bearing is inspired by logicalplanet:

https://www.printables.com/model/777889-lazy-susan-mechanism-20-conical-bearings