Gaslands Billboard with Team Names and Lap Counter

A simple billboard/scoreboard for Gaslands with lap counters.

To assemble, print one (1) each of the billboard_top, billboard_bottom and billboard_base pieces and five (5) of the lap_wheel pieces. Print the billboard_team_plaques piece with a pause at layer 18 (if using .15mm layers). Insert two (2) 6mmx2mm magnets into each name placard, ensuring all of the magnetic polarities are in the same orientation, and finish printing.

Attach ten (10) 6mmx2mm magnets into the larger holes on the back of the billboard_top piece using adhesive (superglue) ensuring that the polarity matches the printed name placards, allowing them to stay attached from the opposite side of the piece.

Once the glue is dried, place one (1) lap_wheel piece onto the posts on the billboard_bottom piece and place the billboard_top and billboard_bottom pieces together, securing them with adhesive (superglue) and ensuring that the the lap_wheels spin freely and the tabs on the billboard_bottom piece fit into the recesses on the billboard_top piece.

When dried, attach the assembly to the billboard_base piece using adhesive (superglue).

• Layer height: 0.15mm
• Infill 15% 
• Perimeters: 2
• Solid Layers 3
• Custom Supports in billboard_base piece
  No supports on other pieces