Another kit to keep the (tr)uSDX / ATU (ATU-10-0A) / batteries in one unit

Another kit to keep the (tr)uSDX / ATU (ATU-10-0A) / batteries in one unit

Please note that the plastic may shrink a little and that the sliding slots may become a little tight on the ATU box, I solved this by lightly sanding with sandpaper and filing down the two small pins that are meant to hold them in place. The one in the pictures is printed with Layer height 0.2 and 15% fill and PLA

Recommend that you turn on support when printing the radio holder, it has a small hanging edge that needs support.

The original battery slider can be found here:
https://www.printables.com/model/103619-housing-for-trusdx-qrp-transceiver