7.2v NiMH NiCd Battery End Cover Cap

Summary

Replacement battery end caps for 7.2v NiMH and NiCd battery packs. Due to variations in battery cells and cell insulation this might need scaled for your specific application in your slicer program before printing.
Print Settings

"Print thin walls" should be enabled in Cura. My settings: Printing Temperature: 200 °C Bed Temperature: 60 °C Speed: 50 mm/s Layer height: 0.12 mm Retraction: 6 mm @ 25 mm/s Infill: 20% Initial Layer Speed: 20 mm/s Initial Fan Speed: 0%