January 13, 2022
Description
Feet for the Playseat Challenge. Designed to fit some 50mm x 50mm glider or rubber pads. The glider allow me to easily move my seat around. The front feet can be fixed using zip-ties.
Important: I designed the feet of the seat with additional 15 mm rubber dampeners in mind. The font feet reach all the way to the floor. If you want it different, take care of the heights. I suggest using z-cuts in the slicer or add a cube to add height.
Material: PETG or PLA
Perimeters: 3 or 4
Layer height: 0.20 mm
Infill: 20 %
License:
Creative Commons — Attribution — Noncommercial
misterT
