Wisblock & Radar Sensor Case

Just a very simple basic case for the RAK Wisblock and the RAK Radar Sensor. I used it with the following components, using Meshtastic:

Core: RAK4631
Base Board: RAK19007
Radar Sensor: RAK12013

• To mount the board you can use the bigger screw which come with the RAK19007 base board.
• There is a hole to access the reset button with a pin.
• The USB-C connector is accessible externally.
• No room for a battery, I use this permanently plugged in.
• No holes for the LEDs, use a bright material and they will be visible through the case.
• The port of the case can be glued on.