Printable Pokemon Coin Display Pages

Collection of coins to print for display (updated as more come out!): https://www.printables.com/@CarlThePumpkinMan/collections/2065640

Recently, I’ve been making all the coins from Pokemon TCG Pocket into real-life printable versions. However, this has led to quite the excess of coins on my end, so I whipped up a little display that I use 3M command strips to stick to my door.

You may have to finagle them a bit to get the coins in–often, if you press the coin down straight from the top, it’ll fit just fine, but if you mess up and come in at an angle you may accidentally bend one of the fingers down under the coin, so be careful! I also ran into exactly one coin that was loose, so I had to intentionally bend some of the fingers inwards so it would firmly grasp it. Dunno why that is.

I’ve made 3 sizes:

Regular - Fits the standard 30mm size

Large - Fits coins scaled to 34.2mm in diameter

Jumbo - Fits coins scaled to 51.2mm in diameter

Note: I DO NOT recommend these be used for actual official Pokemon TCG coins. For one, they tend to vary slightly in diameter, and are therefore most likely not even going to fit. But for another, they’re made of fragile plastic as well, so I don’t want to be held responsible if anyone damages their coins trying to muscle them in.

If you do want to put coins in pages, I recommend you put them in a sleeve made of OPP and then in a binder page specifically for displaying coins. 

Enjoy!