Metabo jigsaw to siemens vac adapter

I was sick of connecting my vacuum cleaner with tape to my jigsaw - an adapter had to be made! This is the result. This print consists of 2 parts. The outer part that does the connection between jigsaw and vacuum hose and an inner part that seals the connection.

Print instructions:

• 3 perimeters
• 15% honycomb infill
• PETg would be the best for this piece, but I was lazy to change filament, so I printed in polyTerra PLA sunrise orange (and it works too … )
• print outer part with the jigsaw side on the plate and perhaps use a brim

See also my other workshop stuff: https://www.printables.com/@Antimaterie/collections/1000059

additional notes

I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.

If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.

In general my Prints are not for commercial use, but if you are a print farm owner and want to sell some of my stuff, please contact me.

Hope you enjoy my models.