R36S Case with Compartment and Multicolor Option

This is a  case for the R36S retro game console. I added a compartment in the bottom part for accessories like USB cabel and MicroSD cards. There are also two slots for an USB WIFI adapter and USB-C to USB-A OTG adaptor.  You can choose if you want to print a single color version or if you want to print the top as a multicolor part with graphics.

You need 4 magnets: 8mm x 3mm (0.315in x 0.118in  5/16in x 1/8in)
and a piece of filament for the hinge.

Printing:
The model can be printed in PLA but for the hinge I would use a piece of PETG filament. No supports are needed. The lid may be printed with a brim if you have problem with warping.

For the top part you can choose the no GFX model for a single color print. If you have an AMS/MMU/CMS you can print the multicolor model. For a multicolor print by changing the filament you can use the embossed version and add the filament change in your slicer.

If you want to use the USB slots in the bottom part you should print the USB Test models first to check which version is the best for your printer and your print settings. Don't use force to insert your USB adapters or they get stuck and break! Test first and choose the one where it is easy to insert and remove. With my MK3S+ I had to choose "normal" when printing with the speed profile and “tight” when printing with the quality profile. With my Tevo Tornado I had to choose the “loose” version of the model.

Click HERE if you want to buy me a beer.