Phone holder

I started to enjoy things with movable joints that can be printed print-in-place, so I created this phone holder.
It is made of 4 parts, connected through joints. Suitable for printers with a bed width of 250mm, the model width is 248mm!
For more beautiful colors, I used color change in layers. I attach G-code.
The first color change at a layer height of 0.2mm is at layer 6 /1.2mm/ and the second change is at layer 17 /3.4mm/
I added a thin auxiliary plate to the right edge of the model, then cut it

The stand is for phones up to 11.5mm thick - that's a phone in a silicone case.

If the holder comes apart after insertion, I recommend gluing the end parts together to avoid damaging your phone.