Gauge mount/holder to fit Vivaro/Traffic/Primastar vans

52mm gauge and lock switch mount to replace stock switch panel. The original lock switch clicks into place as per the original panel and the the whole gauge mount also clips into place in the original dash piece. The included gauge back plate is designed to allow both M4 and M3 studs at various spacing due to the print in place sliders.

Print instructions:

Please refer to the attached .3mf for part orientation and print settings. Supports are not needed if oriented correctly as custom supports are already in the models for the main mount clips. It is recommended to print the parts in PETG as that is what I have tested and proven this design in to ensure correct flexibility of the clips.