Fighter Jet

The YF-27 "Wasp" is a highly detailed, 3D-printed prototype fighter jet, inspired by the agility of the F/A-18 Super Hornet and the stealth technology of the F-22 Raptor.

• Fully Articulating Flaps – for aerodynamic accuracy and control.
• Opening Canopy & Detailed Cockpit – featuring an immersive, true-to-life pilot station.
• Multiple Configurations – including gear-down landing mode and weapons bay open configuration for dynamic display options.

Built to push the boundaries of 3D printing, the YF-27 Wasp combines cutting-edge design with functional moving parts and intricate detailing. 

Post prosses- May Have to use cutters to shave down canopy hinge to fit, In tests the canopy can become more clear with glossy clear coat.

Recommended Materials-PETG

Assembly-First, Slide the wings into the slot in the body firmly, then slot in 2joiners to the matching holes on the wing, and body, then slide on the cockpit. Lastly slide the tab at the front of canopy into the corresponding slot on the cockpit

Pre-Made Files-

Gear Up

Gear Up bay open

Gear Down bay open

Gear Down bay closed

For this model you will need at least-

1-Cockpit

1-Body

2-Joiners

1-Wing

1-Canopy

1-Stand(Optional)

Print- (If doing your own combo)

(Scale Down50%) The wings are designed to be printed flat to allow the flaps to work, the cockpit should be positioned with the nose pointed up, and the body should be positioned with the nozzles at the ground.