Multicolor Xbox 360 Controller Wheel With No MMU/AMS

This model is for this Controller Wheel

This is a model where you can print in multicolor but you don't need a MMU or AMS. Here are the steps for printing it:

1. Open the logo in your slicer and slice it like you normally would, and save it to your printer.
2. Open the wheel on top of the logo and aline the wheel with the logo. Make sure not to move the logo or else it will not print correctly.
3. Delete the logo after they are aligned and slice the wheel. Save it to your printer.
4. Print the logo first and then the wheel on top of it. !Do not remove the logo on the build plate!
5. !!WARNING!! THIS MODEL WAS DESIGNED TO BE PRINTED WITH 0.2 LAYER HEIGHT, IF YOU DO NOT USE IT THE PRINT WILL NOT WORK.
6. If you use a different layer height let me know and I will make a new file so you can print it the way you usually do.

Note: If you have a printer with mesh bed leveling make sure that the logo will not be in the way of the leveling when you print the wheel. Also print the wheel with not to dark of a color so that the logo stands out more.

     More designs