February 8, 2025
Description
Recientemente se me ha roto la placa de carga de una powerbank que tenia de 10000mah y he pedido un repuesto diferente por aliexpress(18650 Charging Module: H961-U), por lo que he tenido que adaptar una carcasa para recuperar los componentes que no estaban rotos.
La manera de fijar las baterias a la carcasa es con cinta de doble cara, a la parte inferior y laterales de la carcasa.
El modelo no necesita soportes para imprimirse.
Se sube un modelo con un emoticono en la tapa de la carcasa y la version sin logo.
Para imprimir la version del emoticono, se ha realizado en prusaslicer, siguiendo el metodo de tener 3 extrusores, uno para cada color. En total se realizan 4 cambios de color, ya que la altura de los colores es 0.4mm.
----------------------------------------------------------------------------------------------------------------
Recently the charging board of a 10000mah powerbank that I had was broken and I ordered a different replacement through Aliexpress(18650 Charging Module: H961-U), so I had to adapt a case to recover the components that were not broken.
The way to fix the batteries to the case is with double-sided tape, to the bottom and sides of the case.
The model does not need supports to print.
A model is uploaded with an emoticon on the cover of the case and the version without the logo.
To print the version of the emoticon, it has been done in prusaslicer, following the method of having 3 extruders, one for each color. In total 4 color changes are made, since the height of the colors is 0.4mm.
License:
Creative Commons — Attribution — Noncommercial
8
Altair45
