March 13, 2026
Description
This is my Trophy Winner Cup.
Use bronce, silver or gold filament for a nice finish.
Settings | Value |
|---|---|
Infill | 15% (adaptive cubic) |
Perimeters | 2 |
Layer Height | 0.2 mm Speed |
Material | PETG / PLA |
Supporting Material | only overhangs / organic |
Comments | |
Ironing | no (not needed, but creates a cleaner surface) |
Feedback is welcome.
Share your makes!
License:
Creative Commons — Attribution — Noncommercial — Share Alike
SJM
