Heart-shaped bag hanger

Print the heart-shaped bag hanger using ABS or PTEG filament (ABS recommended).

Heart-shaped bag hanger settings:
- Sparse infill density 65%
- Support

The bag hanger can be adjusted.

Note!!!

After printing, remove the support, gently bend the joints and hold the places marked with arrows with your thumb (in the photo).

The file called Anti-slip pad should be printed using TPU Shore 20D filament and glued (preferably with cyanoacrylate glue).

P.S.
I did not do load tests.

TikTokhttps://l.messenger.com/l.php?u=https%3A%2F%2Fvm.tiktok.com%2FZNd1f4rJP%2F&h=AT2ddZe982N0yFfdFdjg6bnxzw2Snc2YO2alQtW09dvbbiGKvC_43rNg0WLfo2ZL7ub-V5LYCA50apNotTVlFNs9MKd3xGRJjQoZ_rkyH4fRiBGp4d5KanffgK1mUF3z8E0IhQ