infinite hearts

infinite hearts

Infinity mirror with a special surprise when switched on
12 LEDs, USB C,

First of all:
Basic soldering skills are required for assembly. Electronics knowledge is not absolutely necessary - but is an advantage.

Detailed instructions will follow.

How it works:
The infinity mirror consists of two acrylic glass panes, each of which is glued to the inside with a semi-transparent mirror film. Inside there is a row of LEDs.

When the LEDs are activated, the LED ring is reflected on the two mirror surfaces - an LED tunnel is created.

In addition, there is another transparent pane between the two mirror panes - any text or symbol can be attached here.

The inserted symbol can be freely selected, or simply created in the slicer itself. Simply print it out and stick it on the intermediate pane.

<For reasons of time, here are some preliminary instructions>

Required parts (stl)

Some parts are required multiple times or mirrored

• base.stl  (1x)
• hearts.stl  (1x)
• ledring.stl  (1x)
• insidering.stl  (1x)
• lid.stl  (1x + 1x mirrored)
• ringlid.stl  (2x)

You will also need these parts

Mirror foil  https://www.amazon.de/dp/B0C8V4M3QS
12 mini LEDs  https://www.amazon.de/dp/B09R1M91V6
6 resistors 30 Ohm 1/4 Watt  https://www.amazon.de……
3 acrylic glass panes  ø100 x 2  https://www.amazon.de/dp/B0922BLV1G
USC socket  https://www.amazon.de/….

Electronic parts
The LED ring consists of two LEDs connected in series with a 30 ohm resistor. This is then required 6x and connected in parallel to 5V USB C.