The Witcher Book Box - Monsters Version

I recently got the 8 books set The Witcher by Andrzej Sapkowski and i wanted a way to store them as a set and not with other books thrown on a shelf. Looked around the web a bit to find a case/box to display these books and couldn't find one themed to the Witcher series. So i built one.

I designed this for the Romanian version/translation of the books. If you have them in another language, please measure yours first to make sure they will fit the Box. Inside dimensions are 200x192x133mm

This print will fill the MK3s+ plate almost 100% and Prusa Slicer will actually display a tool-path outside the print area if you add a brim. First layer calibration needs to be accurate and plate really cleaned out or the corners will start to lift as i experienced with both prints :)

This is a long print at 0.2mm layer height. I first printed the first draft in Galaxy Black at 0.2 then the Signal White final version at 0.3mm. The 0.3mm print turned out fine, no major differences in details from the 0.2mm one and it cut 7 hours of printing time. 

This one is called “Monsters Version” as it has the Monsters logo on both sides of the box. If time permits, I will make more versions, including one in parts that can be assembled.