Vernier caliper holder for tool board with 45 mm keyhole spacing

This is a remix of the 'Universal Caliper Mount' for tool boards with 45 mm keyhole spacing.

Thanks to the provided *.f3d file from swiss_beluga it was easy to adapt the mount to fit my tool wall system.

Can be hung on a tool wall with 45mm keyhole spacing using 2 M4x10mm countersunk screws.

On the backside are two M4 threads, so the screws can be adjusted as desired, until it fits tight but is still easy removable.

Printing instructions:

• 0.4 nozzle
• 0.2mm Speed
• no supports needed
• 15% infill

Assembling:

• adjust the screws counterclockwise until the holder fits tight but can still be removed easily.